- prices are subject to change without notice
prices quoted are labor and tooling if needed only and do not include parts,
shop materials, shop fees, shipping, taxes etc.
Repaired firearms not picked up 60 days after notification and with no reply will be considered abandoned and sold for charges due.
We will install, but do not warranty, any customer supplies parts. Warrenty of 90 days on all workmanship on factory new parts.
IN THE EVENT A SPECIAL TOOL IS NEEDED, CUSTOMER WILL BE CHARGED 50% OF TOOLING COST IF TOOLING IS PERISHABLE
Bluing
HOT COSTIC
Long Guns except Double Barrel Shot Guns,includs normal polishing 190.00
Hand guns, includes normal polishing 150.00
SLOW RUST BLUING
Double Barrel Shotguns 350.00
Rifle Barrels and hand guns includs normal polishing. 290.00
Cleaning |
Firearm is 100% Dissembled Cleaned, checked for wear, oiled and reassembled. |
Hand gun | 55.00 |
Rifle or Shotgun | 45.00 |
General Rifle Work
Polishing of handguns Stainless & Nickle 75.00 - 150.00
chamber & fit barrel | to action | 150.00 - 250.00 |
cut & crown barrel | handgun - rifle - shotgun | 35.00 - 95.00 |
check head space | | 30.00 - 50.00 |
check head space | test fire-ammo extra | 50.00 - 60.00 |
forge bolt handle | | 65.00 - 150.00 |
lap barrel | | 50.00 - 130.00 |
lap in bolt lugs | no setting back or fitting | 40.00 - 75.00 |
lap scope rings | | 50.00 - 60.00 |
make chamber cast | | 50.00 - 95.00 |
re-contour receiver ring | front or rear | 50.00 - 140.00 |
remove from chamber | stuck fired case | hourly rate |
remove from chamber | stuck live round | 65.00 - 150.00 |
remove from barrel | fouling | hourly rate |
remove from bore | obstruction | hourly rate |
weld on new bolt handle |
| 100.00 - 150.00 |
Accurizing
adjustable rifle trigger | adjust trigger
| 55.00 - 65.00 |
blueprint action |
| 235.00 |
custom barrel installation | does not include barrel | 325.00 |
custom chambering |
| hourly rate |
de-weight rifle action |
| 350.00 - 450.00 |
free float barrel |
| 70.00 |
glass bed | action - barrel - lug | 75.00 - 125.00 |
|
| |
pillar bed rifle | includes free float BRL
| 225.00 |
trigger job | on 870-1100-742-7400 | 60.00 |
true | bolt face | 75.00 |
true | front of receiver | 75.00 |
Shotgun work
back-boring | | hourly rate |
choke | install screw-in + tubes | 85.00 - 150.00 |
choke | open / modify per tube | 35.00 - 75.00 |
long forcing cone | non plated bore, each | 40.00 - 70.00 |
long forcing cone | plated bores, each | 50.00 - 100.00 |
polish chamber / bore | | 35.00 - 75.00 |
port barrel | price per barrel | 75.00 - 150.00 |
raise dent in barrel | plus cost of bluing | 50.00 - 150.00 |
re-solder fore end lug | plus cost of bluing | hourly rate |
re-solder rib | plus cost of bluing | hourly rate |
refit hinge pin lug | | 100.00 - 250.00 |
straighten/adjust barrel | | 50.00 - 95.00 |
1911's
bevel magazine well |
| 20.00 - 65.00 |
checker | frame-front-rear strap | 200.00 - 220.00 |
fit barrel | non-ramped barrel | 90.00 - 150.00 |
fit barrel | ramped barrel | 80.00 - 175.00 |
fit barrel bushing |
| 50.00 - 100.00 |
fit custom hammer | | 45.00 - 90.00 |
fit new trigger |
| 20.00 - 45.00 |
install safety | thumb or grip | 60.00 - 70.00 |
install safety | wilson style | 110.00 - 140.00 |
modify frame | for beaver tail safety | 75.00 - 125.00 |
modify & open | ejection port of slide | 25.00 - 65.00 |
polish | throat, barrel, ramp | 25.00 - 50.00 |
stipple frame |
| 40.00 - 90.00 |
WOOD FINISHING
HUNTERS FINISH does not include any shaping
unfilled oil or lacquer | average stock | 90.00 - 150.00 |
unfilled oil or lacquer | complicated
| 100.00 - 175.00 |
unfilled paint | | 75.00
|
GUNSMITH FINISH does not include any shaping
filled, rubbed oil | average stock | 125.00 - 210.00 |
filled, rubbed oil | complicated stock | 150.00 - 275.00 |
filled, spray finish | lacquer or polyurethane | 95.00 - 160.00 |
RE-CUT CHECKERING other than by the hour
per panel | simple pattern | 50.00 - 120.00 |
per panel | complicated pattern | 75.00 - 170.00 |
STOCK WORK
install recoil pad | labor only | 75.00 - 125.00 |
install recoil reducer | simple - in butt stock | 25.00 - 45.00 |
install recoil reducer | drill stock & install | 50.00 - 95.00 |
install recoil reducer | hyd butt plate-style | 75.00 - 125.00 |
install adjustable butt
| labor only | 60.00 - 150.00 |
install sling swivels | standard & o/d | 35.00 - 55.00 |
install cross bolt | not including refinish | 40.00 - 75.00 |
adj. comb hardware | labor only | 125.00 - 225.00 |
semi-finished stock | in-letting & finishing | 300.00 - 650.00 |
fiberglass stock blank | fit - bed - finish | 175.00 - 350.00 |
pre-finish synthetic stock | Final Fit
| 65.00 - 120.00 |